Installation Instruction
Please check if adaptors fit the tap, if
adaptors fail to fit, please replace the tap.
Amway eSpring Water Purifier
(With cartridge)
Product Manual
Power adaptor
Product Component
Installation Component
* Please refer to Amway eSpring
®
100188CH Water Treatment System Product Manual for more installation
information.
Connection between tap and adaptor
Connection between tubing and diverter
Connection between L-shape
connector and bracket
Connection between tubing and
L-shape connector
Connection between collar and base
1
2
3
4
5
1
Component Check
3
Connecting tubing
4
Leak Check
5
Completing Installation
and Testing
2
Installation for Adaptors
and Diverter
Installation of diverter
Installation of
adaptors
1
2
Make sure to make a straight cut to
create a notch end on the tubes.
Ensure the tubing is fully pushed into
the bracket until it meets or exceed
the mark .
If tubing is too close
to the wall and
results in distortion,
leaks may be
caused.
After installing
Amway eSpring or
replacing the
cartridge, flush for a
while to remove the
bubble and carbon
dust in the
water.
1
2
Adaptors kit
Diverter
Tubing
L-shape connector
2 Tubing supports
Tubing Removal tool
2 Tubing Band
1
2
3
5
4
Matching List of Amway eSpring
®
Water Purifier
Connector & Water Tap Types
Amway eSpring
®
accommodates five standard adaptors for different types of taps. For
taps that don’t fit these five types of standard adaptors, Amway provides additional
three types of complementary adaptors for sale upon users’ need. Please check the
tap type before installing. If the adaptors fail to match with the tap, please replace the
tap to ensure the proper installation of Amway eSpring
®
.
Before Installation, please check the tap size against adaptor sizes
Unsuitable taps
3
Oval Shape Taps Sprayer faucets
Other unsuitable taps include but not limit to:
Automatic sensor faucet Outer spiral taps with diameter sized over 22mm
Inner spiral taps with diameter sized over 24mm Other non-round taps
Taps with shorter than 15mm
and no round spiral edge
Taps with
quadrilateral end
Taps with diameter sized
over 24mm and no spiral
Supplementary connecter (Self-purchase)
2
tpi: threads per inch
Adapt to inner spiral
tap size from 5/16”
to 26tpi or outer
spiral tap size from
13/16”to 24tpi
Adapt to inner spiral
tap size from
15/16” to 27tpi or
outer spiral tap size
from 0.77” to 24tpi
Adapt to inner spiral
tap size from
55/64” to 27tpi or
outer spiral tap size
from 1mm X 19mm
Supplementary
connecter
I
Supplementary
connecter
II
Supplementary
connecter
III
Five standard connectors for Amway eSpring
®
1
Taps Diameter Components
Outer Spiral Taps
Inner Spiral Taps
Taps without Spiral
55 / 64 ″
7 / 8 ″
13 / 16 ″
22 mm
24 mm
12 - 24 mm
Metal Connecter
(On top of diverter)
Large Connecter
Small Connecter
Check tap type and size
1
Check components
2
Spiral Connecter
General Connector
Notice: Amway eSpring
®
product package contains the five connecter components. The metal connecter is in the diverter.
Taps with edge
Taps without edge
Diameter less than 24mm
Shorter than
15mm
(20 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals